A adição de resíduos industriais em cerâmicas vermelhas tem sido o alvo de diversos estudos, onde se busca uma destinação final adequada ao resíduo e melhoria das características da cerâmica. Neste trabalho, avaliou-se a adição de cinzas leves de carvão mineral oriundas de uma usina termelétrica existente em Figueira, PR. Foram preparadas misturas de 0, 10, 20, 30, 40 e 50% de cinzas em argila e produzidos corpos de prova de 6 cm x 2 cm x 0,5 cm por calcinação a 950 ºC. Avaliou-se os parâmetros perda ao fogo, densidade aparente, porosidade aparente, retração linear, absorção de água e resistência mecânica. Os resultados dos ensaios indicaram que influência do material incombusto presentes nas cinzas foi superior a qualquer efeito dos outros componentes das cinzas.
The addition of industrial waste into red ceramic has been the subject of several studies, which seek to dispose the waste properly and to improving the characteristics of ceramics. In this study, the addition of fly ash from coal derived from an existing power plant in Figueira, PR, Brazil, was evaluated. Mixtures of 0, 10, 20, 30, 40 and 50% ash in clay were prepared and 2 cm x 6 cm x 0.5 cm samples produced by calcination at 950 ºC. The loss on ignition, bulk density, apparent porosity, linear shrinkage, water absorption and mechanical strength parameters were evaluated. The results indicated that the influence of unburned material present in the ash was higher than any effect of other components of the ash.